The features of solder paste mixer

1. 0 maximum speed can reach 1000 rpm

1.1 When stirring, it is necessary to de-ice the solder paste beforehand;

1.2 do not have to open the container;

1.3 power single phase 220v:

1.4 No gas problem:

1.5 does not destroy the shape of tin powder:

1.6 fixtures are suitable for all kinds of 500g packaging solder paste cans;

1.7 mixing time can be set arbitrarily;

1.8 has manual speed control function

The solder paste mixer operating procedures and precautions

1 Operation steps

1.0 After commissioning, open the top cover of the machine and check that there

are no foreign objects inside the machine.

1.1 Turn the angle of the solder paste fixture of the machine and place the solder

paste jar to be stirred into the machine. Inside the fixture.

1.2 Please turn the solder paste can by hand to confirm that there will be no collision,

and the top cover of the machine Close and turn on the power switch.

1.3 Adjust the time setting time on the panel to the better mixing time, depending on

the solder paste label difference.

1.4 After the start switch is pressed, the running indicator lights. The machine starts

to automatically stir at high speed. The machine stops automatically until it is completed.

1.5 After the operation is completed, the operation stops, and the display shows the actual

mixing time. Determine the machine. After the operation stops, open the upper cover and

remove the solder paste can on the clamp.

The evenly mixed solder paste can be used.

1.6 To stop the machine running during operation, press the power switch key to stop and

cancel the operation.

1.7 Open the top cover of the machine during operation, the machine will automatically stop

running, and the upper cover will be covered. To continue the mixing operation, press the start switch again.

1.8 After the production quantity is completed, turn off the power switch;

2 Precautions

2.0 After the production runs, to open the top cover of the machine, you must wait until the

machine has completely stopped before opening:

2.1 The solder paste can or the weight on the two fixtures on the left and right sides, the

weight difference can not exceed 100 Gram. Otherwise, it will cause the machine to shake

when it is stirred at high speed. Please try to avoid;

The parameters of solder paste mixer

Contact information

Best Regards For You

website:http://www.etonsmt.com
Email:alison@eton-mounter.com

Whatsapp:+86 18973049918
Wechat:18973049918

Add: The 44th. Bld.,The5th.Cuigang Industrial Area,Huaide Community,Fuyong, Baoan District,Shenzhen,China
Shenzhen Eton Automation Equipment Co., Ltd.

Shenzhen ETON Automation Equipment Co.,LTD. was establised in 2007,possess more than 300 staff at present and cover an area of more than 20000 square meters,is the largest leading manufacturer of high-speed pick and place machine and SMT machine for LED light production and Electronic field,which is also a high-tech enterprise and top brand well-known in China with good reputation.
 

  ETON invented the fastest automatic pick and place machine with speed 150000CPH,which is the fastest machine in the world,awarded many global first technology patent,also invented the global first machine for any length of 1M 5M 50M 100M 500M flexible LED strip,won large market in USA,KOREA,INDIA,GERMANY,EGYPT,TURKEY,VIETNAM,TUNISIA ETC.
 

  Since the establishment of the company, with the green and energy-saving development trends of global illumination and rapid development of LED industry and its requests for the manufacturing craft, ETON has seized the opportunity and risen quickly, they have independently researched、designed、manufactured a set of quicker、more stable、more optimal LED fully automatic, high speed, energy-saving chip mounter and multi-function chip mounter, which have been highly recognized in the industry for its absolute advantage in speed, stability and capacity, at the same time, it have solved the offset and fling material issues when producing 1.2 meters, 1.5 meters lamp plates and wireless long FPCB and shaped component at a high speed. ETON has passed ISO9001 quality management system certification and has obtained more than one hundred of patents and certificates, including for utility model, personal invention, software copyright and so on. We have established cooperative relationship with well-known enterprises at home and abroad, such asMLS,OPPLE,NVC,Navigation,PAK,ETI,FSL, Home Lighting,Yangguang Lighting, XSY, Sansi, India RK, India SURYA, Vietnam RANGDONG, Egypt FUTEK etc..

  Our products have been exported to more than 20 countries and regions, including Korea, India, Vietnam, Tunisia, Egypt, Turkey and so on. Meanwhile, the company has created customer service center, where records every customer and the sale of every set of machine permanently. Its existence can timely solve customer’s questions when using it, which truly provides the convenience and assurance for our customers.

  “High efficiency” “High quality” and “Stability” are the core technology of ETON,technology innovation and strict quality control,with excellent service,ETON has grown into the outstanding worldwide brand of SMT machine with good reputation.