Automatic SMT nozzles Cleaner compressed air in the led production line

Economic benefits
Reduce the purchase cost of suction nozzle; after using sme-24 cleaning machine, it can solve the problem of too dirty suction nozzle and scrap, so as to extend the service life.
Reduce unnecessary labor; because the machine adopts automatic cleaning, no special person is responsible for it, and the whole process is automatically completed by the machine.

It can effectively reduce the defective rate of products and improve the productivity of SMT. In the production process, a large part of it is caused by the uneven dirt on the surface of the suction nozzle and the dirt in the inner cavity, resulting in the throwing or mounting displacement, resulting in poor subsequent welding. After using the cleaning machine, the suction nozzle can always be protected in a new state, greatly improving the production efficiency.

Parameter

Function of nozzles Cleaner machine

1. Component miniaturization: With the rapid development of the electronics industry, components are becoming more and more miniaturized. 0402,0201 components are becoming more and more common and widely used, and 01005 has also appeared. The miniaturization of components is bound to require the corresponding patch machine nozzle also to miniaturization, which brings a problem to the cleaning of the nozzle, if the large nozzle can also be washed by alcohol, fine needle through the hole method, it is now a small nozzle only a few microns aperture is helpless. When clogging occurs, it has to be scrapped.

2. Smaller spacing: now electronic equipment requires smaller volume, more powerful, so the circuit board components are more and more dense, spacing is smaller and smaller, if the patch in the past a little flat difference will not affect too much, but now may set foot on the neighbor's site, resulting in the improvement of the product defect rate.

3. The effect of lead-free: due to the good activity of lead, if there is a slight deviation in the patch, it can be corrected after reflow welding, but after lead-free, the activity of copper is greatly weakened, if the patch deviation occurs, there is no chance to correct.

4. In summary, the requirements of the patch accuracy is higher and higher, the difference may be a thousand miles. The design accuracy of the patch machine has been quite high, but due to the influence of various factors, its performance is greatly reduced, among which the suction nozzle is not clean is also an important factor.

Company Introduction
ETON mission: professionalism, excellent technology, sharing results.
ETON goal: to create a national brand and build an international Chinese enterprise.
ETON purpose: to create value for customers and create benefits for the society.
ETON vision: determined to become the world’s most competitive manufacturer and service provider of pick and place machine and high-end electronic testing equipment.


Certification

Our company has obtained 9 invention patents, 12 software Copyrights and 112 practical patents

Patent number: ZL 2011 2 0237740.9 ZL 20 11 2 0334606.0

ZL 2012 2 0178869.1 ZL 2012 2 0415505.0

ZL 2012 2 0415044.7 ZL 2012 2 0415356.8

ZL 2012 2 0415061.0

Exhibition

We have came to different countries every year to participate in the exhibition, so that customers can further understand the company and products, expand the company’s influence.

Shenzhen ETON Automation Equipment Co.,LTD. was establised in 2007,possess more than 300 staff at present and cover an area of more than 20000 square meters,is the largest leading manufacturer of high-speed pick and place machine and SMT machine for LED light production and Electronic field,which is also a high-tech enterprise and top brand well-known in China with good reputation.
 

  ETON invented the fastest automatic pick and place machine with speed 150000CPH,which is the fastest machine in the world,awarded many global first technology patent,also invented the global first machine for any length of 1M 5M 50M 100M 500M flexible LED strip,won large market in USA,KOREA,INDIA,GERMANY,EGYPT,TURKEY,VIETNAM,TUNISIA ETC.
 

  Since the establishment of the company, with the green and energy-saving development trends of global illumination and rapid development of LED industry and its requests for the manufacturing craft, ETON has seized the opportunity and risen quickly, they have independently researched、designed、manufactured a set of quicker、more stable、more optimal LED fully automatic, high speed, energy-saving chip mounter and multi-function chip mounter, which have been highly recognized in the industry for its absolute advantage in speed, stability and capacity, at the same time, it have solved the offset and fling material issues when producing 1.2 meters, 1.5 meters lamp plates and wireless long FPCB and shaped component at a high speed. ETON has passed ISO9001 quality management system certification and has obtained more than one hundred of patents and certificates, including for utility model, personal invention, software copyright and so on. We have established cooperative relationship with well-known enterprises at home and abroad, such asMLS,OPPLE,NVC,Navigation,PAK,ETI,FSL, Home Lighting,Yangguang Lighting, XSY, Sansi, India RK, India SURYA, Vietnam RANGDONG, Egypt FUTEK etc..

  Our products have been exported to more than 20 countries and regions, including Korea, India, Vietnam, Tunisia, Egypt, Turkey and so on. Meanwhile, the company has created customer service center, where records every customer and the sale of every set of machine permanently. Its existence can timely solve customer’s questions when using it, which truly provides the convenience and assurance for our customers.

  “High efficiency” “High quality” and “Stability” are the core technology of ETON,technology innovation and strict quality control,with excellent service,ETON has grown into the outstanding worldwide brand of SMT machine with good reputation.