LED Strip Light Production Line SMT Machine

High voltage 2835-220V-60D-20R-8MM strip light production line solution

ETON T9 LED Chip Mounter Machine with 68 Heads ( support customized more heads)

8MM No wire strip light FPCB normally is 30 pieces with total 250mm width. So will using 60 heads mounting led chip at the same time. Group picking and group mounting is greatly improve the mounting speed, could reach around 250000 CPH. It is the gobal fast mounter machine.

T9 is the model of mounter machine, after SMT line, will need test the whole FPCB and then splitting one piece and one piece, after then will be the waterproof assembly. Final is the test and paking rolling.

T9 Mounter machine parameter

Stable running with good quality mechnical part

The frame is the foundation of the machine. All transmission, positioning mechanisms and feeders are firmly fixed on it, so it must have sufficient mechanical strength and rigidity. At present, the placement machine has various types of frames, mainly including the overall casting type and the steel plate welding type. The first type has strong integrity, good rigidity, slight deformation, and stable operation, and is generally used in high-end machines; the second type has the characteristics of simple processing and low cost. The specific structure of the frame chosen for the machine depends on the overall design and load-bearing capacity of the machine. The operation should be smooth, easy, and free of vibration.

How to do machine maintenance

Monthly Inspections This section should be performed by nozzle type and nozzle changing station.
Move the LED light of the lens to check whether the brightness of each LED is sufficient. If it is not bright, the entire LED part should be replaced.
Nozzle shaft Check the O-ring used for each nozzle shaft. If it is found to be aging, replace it in time.
Wipe off the dust and residue on the X-axis screw and apply a thin layer of grease with your hands. Wipe off the dust and residue on the X-axis guide rail and apply a thin layer of grease on it with your hands.
Wipe off the dust and residue on the Y-axis screw and apply a thin layer of grease with your hands. Wipe off the dust and residue on the Y-axis guide rail and apply a thin layer of grease on it with your hands.
Check the movement of the Z-axis rack and gear, applying a thin layer of lubricant to the rack drive components by hand if necessary.
Check the wear and tightness of the R-axis transmission belt, and replace the belt or adjust its tightness if necessary.
Wipe off the dust and residue on the W-axis screw, and apply a thin layer of grease on the feed valve by hand. Check whether the solenoid valve can work normally.
Check the conveyor belt for wear and tightness, and replace the belt or tighten the belt if necessary.

Shenzhen ETON Automation Equipment Co.,LTD. was establised in 2007,possess more than 300 staff at present and cover an area of more than 20000 square meters,is the largest leading manufacturer of high-speed pick and place machine and SMT machine for LED light production and Electronic field,which is also a high-tech enterprise and top brand well-known in China with good reputation.
 

  ETON invented the fastest automatic pick and place machine with speed 150000CPH,which is the fastest machine in the world,awarded many global first technology patent,also invented the global first machine for any length of 1M 5M 50M 100M 500M flexible LED strip,won large market in USA,KOREA,INDIA,GERMANY,EGYPT,TURKEY,VIETNAM,TUNISIA ETC.
 

  Since the establishment of the company, with the green and energy-saving development trends of global illumination and rapid development of LED industry and its requests for the manufacturing craft, ETON has seized the opportunity and risen quickly, they have independently researched、designed、manufactured a set of quicker、more stable、more optimal LED fully automatic, high speed, energy-saving chip mounter and multi-function chip mounter, which have been highly recognized in the industry for its absolute advantage in speed, stability and capacity, at the same time, it have solved the offset and fling material issues when producing 1.2 meters, 1.5 meters lamp plates and wireless long FPCB and shaped component at a high speed. ETON has passed ISO9001 quality management system certification and has obtained more than one hundred of patents and certificates, including for utility model, personal invention, software copyright and so on. We have established cooperative relationship with well-known enterprises at home and abroad, such asMLS,OPPLE,NVC,Navigation,PAK,ETI,FSL, Home Lighting,Yangguang Lighting, XSY, Sansi, India RK, India SURYA, Vietnam RANGDONG, Egypt FUTEK etc..

  Our products have been exported to more than 20 countries and regions, including Korea, India, Vietnam, Tunisia, Egypt, Turkey and so on. Meanwhile, the company has created customer service center, where records every customer and the sale of every set of machine permanently. Its existence can timely solve customer’s questions when using it, which truly provides the convenience and assurance for our customers.

  “High efficiency” “High quality” and “Stability” are the core technology of ETON,technology innovation and strict quality control,with excellent service,ETON has grown into the outstanding worldwide brand of SMT machine with good reputation.